HBProducts | Controller Brine Leakage
Technical data: HBPH-C1
HBPH-C1 is a display designed for connection with the HBPH-MK2-LT sensor. In the display, it is possible to calibrate and set up the alarm limit. The display is provided in a version for installation into the front of a panel, as well as a version built into the cabinet. The cabinet version has a 110/240 V supply and can be installed either indoors or outdoors.
The sensor is supplied with a M12 female connector used for connecting the pH sensor and a 5 m M12 supply cable.
Product Feature
- Display with programmable settings from the front of the display
- Displaying pH level - 0...100 % as well as alarm indication for high level
- 24 V AC/DC power supply
- Available in cabinet for 110/240 V AC supply
Specification
Drawing
| Power supply | Environmental conditions | ||
| Power supply | 24 AC/DC + 10% | Ambient temperature | -20...+70 °C |
| Current consumption | Max 600 mA | Protection degree - front mounted | IP45 |
| Electronic connections | Screw terminals | Humidity | 20...80 % |
| Wiring size | 2,5 mm2 | Mechanical specifications | |
| Input | Installation | Front of panel | |
| Analog input - sensor | 4-20 mA | Measure | 96x96x115 mm |
| Analog input - feedback | 4-20 mA | Cutting dimension in panel | 92,8x92,8 mm |
| Relay function | Alarm - max level | Materiale | Plastic |
| Relay voltage | 5-25 VDC | Display | |
| Output | Display | Red LED, 3 digits | |
| Analog output | 4-20 mA | Alarm | Green and red LED |
| Load | 3A/24VDC | Programming | From front |
| Relay ouput | @24VAC / DC: 3A @110 VAC. 5A @240 VAC: 5A | Update frequency | 1 Hz |
| Approvals | |||
| EMC | EN61000 | ||
Ordering Code
| House design | Ordering code |
|---|---|
| Display for pH sensor - 24 V DC power supply | HBPH-C1 |
| Display for pH sensor built-in a cabinet and with a 110/240 V power supply installed | HBPH-C1-ENC |
Download
Related Products
