HBProducts | Displays Brine Leakage
Product series: HBMD-PH
The Multi Display is available in two versions used for displaying the pH value or level display. The sensor is identical for the two applications except for a setting in the software. The difference is in the scope of supply.
HBMD-PH is a display box for showing the pH value directly, when connected with the HBPH sensor. It is possible to do the calibration in the display box and send the pH value on as a linear analog output to a PLC.
The sensor is supplied with a M12 male connector used for connecting the pH sensor and a 5 m M12 supply cable.
Product Features
- Display the pH value directly
- Suitable for calibration of the pH sensor
- 24 V AC/DC power supply via M12 plug
- Can be installed directly on a wall
Specification
Drawing
| Power supply | Mechanical specifications | ||
| Voltage | 24 V AC/DC ± 10 % | Mounting | Wall mounting |
| Frequency | 50/60 Hz | External measurement | 100x81x40 mm (WxHxD) |
| Current consumption | Max 40 mA | Cut-out measurement | N/A |
| Connection | Plug | Material | Plastic |
| Wire size | <2,5 mm2 | Approvals | |
| Output | EMC Emission | EN61000-3-2 | |
| Analog out | 4-20 mA | EMC Immunity | EN61000-4-2 |
| Load | 3A/24 VDC | Display | |
| Relay output | @24VAC & DC: 3 x 3A @110 VAC. 3 x 5A @240 VAC: 3 x 5A | Digit's display | 3 digits, red |
| Environmental conditions | Alarm indication | N/A | |
| Surrounding temperature | -40...+70 °C | Programming | HB Tool |
| Protection class | IP65 | Updating | 1 time each second |
| Relative humidity | 20...80 % | Input | |
| Analog input - sensor | 4-20 mA | ||
Ordering Code
House Design: [pH Controller & Display] Ordering Code : HBMD-PH
Download
Related Products
